The Best Mini Ic Smd Pickup Vacuum Pump

0
877 reviews analysed

1. Vacuum Sucking Pen,110V IC SMD Pick up Vacuum Sucking Pen Remover Tool with 2 Suction Headers (White+Yellow)

Vacuum Sucking Pen,110V IC SMD Pick up Vacuum Sucking Pen Remover Tool with 2 Suction Headers (White+Yellow)

Feature

Description

Color:White+Yellow

Description:
A machine for two simultaneous operation and single patch speed in the 2 seconds 1PCS range, the unique static noise design makes the machine work quietly. (Such as BGA, QPF and other large IC can be used to operate the suction cup, with your fingers to block the use of a large number of components, such as BGA, QPF and other large ICs can be used to hold the SMD components. There is a hole in the pen suck, put the finger after the release of the release), because we put the machine’s suction range strictly control the viscosity of the solder paste, the machine’s suction size adjustable knob, so do not worry SMD components sucked up to the solder paste printed on the paste after the phenomenon was sucked back.

Package Included:
1 x Pump Vacuum Suction Pen Placement Machine
2 x Vacuum Suction Pen
2 x Needles (1.6mm)
2 x Sucker (0.3mm,10mm)

2. Whitelotous Mini Vacuum Sucking Pen IC SMD Sucker Pick Up Hand Tool Set with 4 Suction Headers

Whitelotous Mini Vacuum Sucking Pen IC SMD Sucker Pick Up Hand Tool Set with 4 Suction Headers

Feature

Description

Specifications:

Quantity: 1 x Suction Pen, 4 x Suction Headers, 4 x Suckers

Absorptive capacity of the suction cup: 1*9.5mm can absorb about 40g, 1*6.5mm can absorb about 18g, 2*2mm can absorb about 3g

Gross weight: approx.28g

Packing size: approx. 240*71*13mm/9.44*2.79*0.51”

Note:

Please allow 1-3cm differs due to manual measurement.

Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Package Content:

1 x Mini Vacuum Sucking Pen Set

3. 1Pcs 4 In 1 Mini IC SMD Pick-Up Vacuum Sucking Pen Soldering Pump Sucker Tool With 4 Suction Headers For Capacitor Resistor Chip

1Pcs 4 In 1 Mini IC SMD Pick-Up Vacuum Sucking Pen Soldering Pump Sucker Tool With 4 Suction Headers For Capacitor Resistor Chip

Feature

Description

Type:Hand Tool Parts
Usage:Home DIY

4. XinQuan Wang 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

XinQuan Wang 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Feature

Description

SMD IC Vacuum Sucking Pen Picker Pick Hand Tool 4 Suction Headers for MT-668 top

Direction:
Install a proper IC suction header on suction pencil.
Place the suction header lever on IC.
Squeeze the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

3 suction headers are provided with this suction pencil,large size,medium size and small size respectively for:40g,18g,3g
Note: open the BGA, be sure to use the vacuum pen, must not direct with forceps clip, so as not to break the welding plate.
Item Size: 92mm (L)*12mm(D)

Package Included:
1 x SMD Vacuum Sucking Pen

5. Bin Zhang 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Bin Zhang 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Feature

Description

SMD IC Vacuum Sucking Pen Picker Pick Hand Tool 4 Suction Headers for MT-668 top

Direction:
Install a proper IC suction header on suction pencil.
Place the suction header lever on IC.
Squeeze the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

3 suction headers are provided with this suction pencil,large size,medium size and small size respectively for:40g,18g,3g
Note: open the BGA, be sure to use the vacuum pen, must not direct with forceps clip, so as not to break the welding plate.
Item Size: 92mm (L)*12mm(D)

Package Included:
1 x SMD Vacuum Sucking Pen

6. QinMei Zhou 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

QinMei Zhou 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Feature

Description

SMD IC Vacuum Sucking Pen Picker Pick Hand Tool 4 Suction Headers for MT-668 top

Direction:
Install a proper IC suction header on suction pencil.
Place the suction header lever on IC.
Squeeze the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

3 suction headers are provided with this suction pencil,large size,medium size and small size respectively for:40g,18g,3g
Note: open the BGA, be sure to use the vacuum pen, must not direct with forceps clip, so as not to break the welding plate.
Item Size: 92mm (L)*12mm(D)

Package Included:
1 x SMD Vacuum Sucking Pen

7. MADONG 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

MADONG 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Feature

Description

SMD IC Vacuum Sucking Pen Picker Pick Hand Tool 4 Suction Headers for MT-668 top

Direction:
Install a proper IC suction header on suction pencil.
Place the suction header lever on IC.
Squeeze the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

3 suction headers are provided with this suction pencil,large size,medium size and small size respectively for:40g,18g,3g
Note: open the BGA, be sure to use the vacuum pen, must not direct with forceps clip, so as not to break the welding plate.
Item Size: 92mm (L)*12mm(D)

Package Included:
1 x SMD Vacuum Sucking Pen

8. Module Kits Accessory 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Module Kits Accessory 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers for Capacitor Resistor Chip

Feature

Description

DIY Assembly Kit , Do it by your self.
Replace your damaged parts.
SMD IC Vacuum Sucking Pen Picker Pick Hand Tool 4 Suction Headers for MT-668 top

Direction:
Install a proper IC suction header on suction pencil.
Place the suction header lever on IC.
Squeeze the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

3 suction headers are provided with this suction pencil,large size,medium size and small size respectively for:40g,18g,3g
Note: open the BGA, be sure to use the vacuum pen, must not direct with forceps clip, so as not to break the welding plate.
Item Size: 92mm (L)*12mm(D)

Package Included:
1 x SMD Vacuum Sucking Pen

9. Jane Ge 2020 Store for Capacitor Resistor Chip 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers

Jane Ge 2020 Store for Capacitor Resistor Chip 4 in 1 Mini IC SMD Pick-up Vacuum Sucking Pen Soldering Pump Sucker Tool with 4 Suction Headers

Feature

Description

Right Choice For Your machine.
About this product:
SMD IC Vacuum Sucking Pen Picker Pick Hand Tool 4 Suction Headers for MT-668 top

Direction:
Install a proper IC suction header on suction pencil.
Place the suction header lever on IC.
Squeeze the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.

3 suction headers are provided with this suction pencil,large size,medium size and small size respectively for:40g,18g,3g
Note: open the BGA, be sure to use the vacuum pen, must not direct with forceps clip, so as not to break the welding plate.
Item Size: 92mm (L)*12mm(D)

Package Included:
1 x SMD Vacuum Sucking Pen
Please confirm your suitable model before ordering.
Please confirm the shipping time maybe delay in busy season.
Please look for "Jane Ge" to find more items in our store and enjoy shopping on Amazon.

Conclusion

By our suggestions above, we hope that you can found Mini Ic Smd Pickup Vacuum Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general